HIS Radeon X1300 512mb Hm Pci-e x16- Stock 450/500 -OC’d 575/668 (stable no problems)(stil l some room to go but with some imperfections)
Leadtek 8600 GT DDR 2 540/400 oc 650/480 idle 55c full 70c
4130
Sapphire x1600 Pro 512MB AGP - Stock 500/405 - Clocked 610/405 44oC idle (Fan50%) 63oC full load (fan 65%). Somehow it doesn’t like messing with the memory timings. Screen goes black instantly when changed. Any suggestions?
Sapphire 1950Pro (RV570XT) 256mb w/ HIS Turbo IceQ 3, modded BIOS 1.45v and mem timings: 580/700(1400) OC 652/856(1712)@50c -Formula350-
MSI ATI RADEON RX9550 128 MB (250/200) flashed to ATI RADEON 9600 Pro with Overclocking *450/300*,runs stable,the Video Card doesn’t have a fan so I installed a 80mm Fan Case aiming the card to cool it. / CH@NO /
ATI x1600PRO (AGP) 512mb DDR2 stock - 500/400 *650/594* Fatal1ty FC-ZV9
ATI X1600PRO(AGP)512MB DDR2 Stock - 500/405 OC’ed 621/445 @1.65v / Runs 30’c idle and 47’c under load w/Zalman FC-ZV9 & Arctic Silver 5 - GQ
Retail ATI X1650 Pro 4 Pipelines? Help! Stock 600/400 OC 700/464 Stable. Runs 37C under full load. I have an air transfer unit custom built. OC XP M 2500+ @ 2.6MHZ 38C P95 for days!
someone spammed it!!!!!!!! thats why i deleted it, if you have legitimate stuff legitimate to the subject than please post, but dont post about hard wood flooring!!!!
Connect3D 9550 454/250 Stock cooling with 80mm pointing at it
BBA Ati 8500LE 250/250 stock 300/300 using vantec chipset/vga cooler RevMaynard
ATI X800Pro Vivo 540/600 Stock voltage - djbbenn
Radeon ATI X700PRO AGP Stock:425/432, Stock cooling, 100%fan constantly: 469/527 - epi
Club3D Radeon 9600Pro RV350 AGP Stock 400/300, GlacialTech GT-F1 Fan Card 440/330
ATI Radeon 9600Pro RV350 AGP Stock:400/300, Replaced stock thermal pad with generic “Manhattan” thermal paste, and sanded black paint off of stock heatsink (gpu core contact area only) to a mirror shine: 465/345 with no artifacts for 200+ minutes.
BBA ATi 9600pro 530/350 artifact free (using a Vantec chipset cooler) RevMaynard
Sapphire Radeon 9600 Atlantis: 450/220
Sapphire Radeon 9550 flashed to 9600 with stock cooler: 420/500
BBA 9800pro 468/390 (R350) stock cooling.RevMaynard
Sapphire 9800pro XT bios @ 487/422 vga silencer3 copper ram sinks
ATI RadeonX1600 600.75 Core / 450 Mem Water Cooled 35`C idle 39`C wide open AMD XP3200 at 3202Mhz 3Dmark06 1975
Palit ATI Radeon X1600Pro 256m (ddr2) AGP, standard cooler. (500/400) → 632/442. Currently running on 600/440, it’s stable for hours with WoW.
ATI x800 GTO2, Flashed to x850 xt, 520mhz core, 594mhz mem, Standard cooler, <70 degrees at full tilt. - [ASH]Merry_Prankster.
SAPPHIRE RADEON 9700 non Pro 277/270 –> 370/292 (core/mem)
ASUS X850XT PE 540/590 –> 608/633
ATI Radeon X850 xt Agp 520/540 –> 532/553 (40’C idle , 56’C loading) Standard coolers could go higher if i had a Ati silencer
BBA Ati X850XT AGP 560/612 fan speed set at 100% artifact free RevMaynard
Dell ATI Radeon X600Pro 256Mb/128-bits Hynix DDR2-300 at 400/250 overclocked to 480/360 (memory can run at 369Mhz) with “PASSIVE COOLING” → no fans = no noise. It’s stable, but it doesn’t have temperature monitoring.
ATI Radeon X600pro 333/200 –> 500/304 standard cooling
ATI Radeon X800pro 475/450 12pp (pci-e) -flashed x800xt bios on→ 500/500 16pp - lowered main Memtimings one step →oc, stable at 540/560 with ati silencer4 - ButchA
BBA X1800XT Stock volts 700/800 fan speed 100% artifact free RevMaynard
Connect3D X1800 GTO 1.5v core, 1.95v mem - 756/734 on water
BBA X1900XT Stock Volts 740/830 fan speed 60% artifact free RevMaynard
Connect3D X850 Pro VIVO AGP500/500 » 560/560 12 pp, 38C idle, 61C load, stable with Ati Silencer 5 v2 TREX_HUNTER
ATI Radeon x600 256 MB Hyper Memory 400/250 –> 510/305 Normal cooling
Sapphire X1800GTO 500/500 –> 790/700 with 1,575vGPU @ Water... by Janchu88
Sapphire X700 AGP 400/250 —> 462/350 @ Stock cooling by PM_Siggi
ATI Radeon x800 PRO VIVO, Stock Cooling, Bios flashed to 16 Pipelines, ATI Tool manually overclocked to 530mhz Core, 560mhz Ram (1120mhz Effective) Idle temperature 49C, Load temperature 80C.
DELL Inspiron 6000 with ATI Radeon X300 with stock cooling. GPU at 438Mhz and RAM at 324Mhz. Perfectly stable, no artifacts and good performance (From a little laptop that is). Stock is 300Mhz and 199Mhz. Vista performance counter went from 3.4 to 3.8. MrBee
ATI PowerColor Radeon 9550 AGP(256 MB)with after market cooler(Kingwin Super Heat Pipe Univ. VGA Cooler(Huge Heatsinks with 3 fans) no artifacts 620/590 Heat sink was barely warm..... Hellblazer55
ATi radeon x600 pro 256 mb 400/300 @ 591/333 stock cooling, stable gaming but no temp indicator : / SS4
MSI RX9550 128mb 250/200 @ 455/310, ramsinks and a trimmed 9800pro heatsink /xlt92x/
Evga geforce 6600le 256mb 300/500 @ 428/544 stable but no temparature readings
Albatron Geforce 8800 GTS 320MB stock 500/800 OC’ed to 633/983 - stable gaming, max temp. 81 degrees C ThomC
BFG Geforce 680022 256 GDDR3 350/500 stock–>OC’ed to 412/550 stable/stock cooling -HATEME-
Powercolour ATI Radion X1300 512 GDDR stock 450/250 621/350 Stable but cant tell temp Veyka
Saphire Radeon 9600 pro 256 398/223 → 480/273 No artifacts after a couple hours testing so far and still cool using the default fan and heat sink! - nate
Gainward 7600GS pci-e ddr3 1.4ns 500/600 → 750/830 3dmark06 stable 61c with 1.50vGPU mod - hasenfrasen
Compal (H)EL81 with NVidia GeForce 7600 Go, stock: 350/350, OC’ed to 500/430, UC’ed to 38/38 ;), stable and artifact-free, max temp. around 60 degrees C - markusj
nVidia 8600M GT DDR2 256Mb - stock: 475/400, OC’d: 640/540. Stable and Artifact free for nine hours. MAX Temp: 67 degrees C. Stock Cooling. [AMGDUST]
ATI X1300 Pro 256MB 600/400 OC’d 621/504 with 100% stable, over 150FPS, temps stay under 70ºC Stock cooling.